CROSS
The CROSS is a fast and stable glider designed to be used by beginner pilots after their school training and recreational cross-country pilots. This innovative design utilizes light weight fabrics making the CROSS one of the easiest PPG glider to inflate and launch in zero wind condition.
The idea was to create a safe, fast reflex glider that is fun to fly, but also usable as a paragliding wing. The CROSS is equipped with dual trimmer system. Long trimmers for the fast flight mode, as well as a second set of negative trimmers, to reduce the REFLEX profile on the shape and use it as an efficient paraglider.
Equipped with 2D steering, the CROSS is soft and easy to maneuver, with a minimal need of brake pressure.
- 42 cells with 8 of them closed
- Use of 29 gr/m² Nylon 6.6 light fabric on top and bottom surface of the canopy for a super easy inflation
- Diagonal bands in all the cells
- Mini-Ribs: between the cells of the trailing edge to improve performance and handling
- Flexible nylon battens reinforcements
- Advanced air foil design to boost and keep stable internal pressure
- Advanced REFLEX profile for stability
- Dual Trim System: Long trimmers for acceleration and negative trimmers for free-flight use
- 2D steering system, easy to maneuver with minimal brake pressure
XXS |
XS |
S |
M |
L |
|
|---|---|---|---|---|---|
| Flat area (m²) | 19,6 | 21,4 | 22,9 | 24,7 | 26,4 |
| Flat Aspect Ratio | 5,18 | 5,18 | 5,18 | 5,18 | 5,18 |
| Cells | 42 | 42 | 42 | 42 | 42 |
| Projected Aspect Ratio | 4,23 | 4,23 | 4,23 | 4,23 | 4,23 |
| Glider weight (kg) | 3,9 | 4,3 | 4,7 | 5,1 | 5,5 |
| Min speed (km/h) | 24-26 | 24-26 | 24-26 | 24-26 | 24-26 |
| Max speed (km/h) | 65±5 | 65±5 | 65±5 | 65±5 | 65±5 |
| Recommended pilot weight (kg) | 50/80 | 65/95 | 80/110 | 95/125 | 110/140 |
| Registration/Certification | DGAC Pending |
DGAC Pending |
DGAC Pending |
DGAC Pending |
DGAC Pending |
Leading edge fabric: 40 gr/m² – 30D Nylon 6.6 high tenacity with PU+Silicone coating
Top/Bottom fabrics: 29 gr/m² – 20D Nylon 6.6 high tenacity with PU+Silicone coating
Profiles: Pro-Nyl 36 gr/m² High Tenacity Nylon Rip-Stop hard finish
Reinforcements: 2,5 mm Nylontab (Profile front)
Lines:
Cousin Technora® 1,1 mm – 104,1 daN
Cousin Technora® 1,5 mm – 139,3 daN
Cousin Technora® 2,1 mm – 238,6 daN
Cousin Technora® 2,5 mm – 382,0 daN
Risers: 19 x 2,0 mm 1600kg
